Home Products - Installation Equipment - Blowing Machines

Blowing Machines

We offer a wide range of blowing machines for underground and overhead blowing of fibre optic cables and subduct pipes. These machines are specially designed for blowing telecommunication and data transmission cables in preinstalled ducts and are also suitable for the blowing of subducts.

The system operates on the viscous drag principle, employing compressed air to install the cable, controlled and assisted by a belt drive system. The cable is propelled by compressed air and fed into the duct, while the hydraulically powered belt drive system controls the fibre optic cable. The electronic monitoring system reads out speed and distance, provides protection against duct or cable obstructions and includes an emergency stop facility.

MiniFlow RAPID

Fiber Optic Cable Blowing Machine (Hydraulic Driven) With this blowing machine, you can handle cables and fibers from 3-12 mm and blowthem into ducts of 7-20 mm. The MiniFlow RAPID is a compact designed blowing machine that is very easy to handle and operate.

Specifications:

miniflow rapid Cable Diameter: 3 to 12 mm
Into ducts: 7 to 20 mm
Fiber blowing distance: <3.5 km
Maximum speed: 100 m/min
Recommended pressure and airflow: 8-16 bar
Weight: 24 kg
Lentgh-Width-Height: 650-225-210 mm

MultiFlow

Relining of Microducts into Ducts (Hydraulic Driven) It is built and designed for rough conditions and easy handling and operation. The MultiFlow is especially designed for relining of multiple micro ducts, but with the cable and fiber blowing kit, it can be used and operated as all normal cable and fiber blowing machines.

Specifications:

MultiFlow singleside Cable Diameter: On Demand
Into ducts: 18 to 70 mm
Fiber blowing distance: <10 km
Maximum speed: 80 m/min
Recommended pressure and airflow: 8-12 bar
Weight: 40 kg
Lentgh-Width-Height: 700-230-350 mm

PowerFlow

Fiber Blowing Machine (Hydraulic Driven) This cable and fiber blowing machine is very strong, because it is built and designed for rough conditions and for blowing in a huge variety of cables, fibers and ducts, but it is still easy to handle and operate.

Specifications:

PowerFlow singleside Cable Diameter: 8 to 25 mm
Into ducts: 18 to 70 mm
Fiber blowing distance: up to 10 km
Maximum speed: up to 80 m/min
Recommended pressure and airflow: 8-12 bar
Weight: 38 kg
Lentgh-Width-Height: 650-230-350 mm

Breeze Cable Blowing Machine

The “BREEZE” Cable Blowing Machine has been designed to meet the growing need for the installation of micro cables. Small and portable with ergonomic controls, it is ideally suited for external or internal use. The compliant double driven cable rollers provide secure grip whilst safely handling the cable.

Specifications:

Breeze Cable Blowing Machine Cable Diameter: 1 to 8 mm
Tube size (Outside Dia): 5.0 to 16 mm
Cable Speed (Adjustable): 0-62m/min
Maximum Air Pressure: 15 bar
Power Requirement: 220/110 Volt
AC 50/60H

AirStream Cable Blowing Machine

The C-1700 AirStream has been designed to maximize protection for micro cables with a compliant double drive concept, backed by the latest technology in servo controls to provide precise control of torque and speed.

Specifications:

AirStream Cable Blowing Machine Cable Diameter: 2.5 to 11mm
Tube size (Outside Dia): 5 to 18 mm
Cable Speed (Adjustable): 0-80m/min
Maximum Air Pressure: 10-15 bar
Power Requirement: 220/110 Volt
Width: 300mm
Length: 460mm
Height: 270mm
Net Weight: 14 kg

AirStream Pneumatic Cable Blowing Machine

The C-1700-PNEU Pneumatic AirStream has been designed to be a robust and simple to operate cable blowing machine. The compliant double drive concept also provides the maximum protection for micro cables.

Specifications:

AirStream Pneumatic Cable Blowing Machine Cable Diameter: 2.5 to 11mm
Tube size (Outside Dia): 5 to 18 mm
Cable Speed (Adjustable): 0-80m/min
Recommended Compressor: >1.5m3/min
@ 10-15 Bar
Power Requirement: 220/110 Volt
Width: 300mm
Length: 460mm
Height: 270mm
Net Weight: 14 kg

Jetstream Cable Blowing Machine

The C-1900 has been designed to provide maximum cable protection, combined with the performance and reliability of hydraulic drive. The profiled double drive belt system is driven by single 32cc hydraulic motor, powered by the proven C-1203-F power pack. The electronic monitoring system provides read-out of speed and distance, gives protection against duct obstructions and includes emergency stop facility.

Specifications:

30200 Cable Range: 6-20mm
Duct Range: 12-50mm
Cable Speed (Adjustable): 0-85m/min (0-280ft/min)
Max Air Pressure: 15 Bar (215psi)
Pushing Force: 600N
Drive Media: Hydraulic
Drive Type: Profiled Belt
Drive Orientation: Horizontal
Cable Speed Measurement: Proximity Switch

Tornado Tube Blowing Machine

3010 The tube-blowing machine, comprising an air box and pusher, has been designed to provide an effective and safe method of installing Micro-tubes. The system operates on the viscous drag principle employing compressed air to install the tubes, controlled and assisted by a belt drive system.

Tornado Cable Blowing Machine

30101 The cable blowing machine, comprising an air box and cable pusher, has been designed to provide an effective and safe method of fibre optic cable installation. The system operates on the viscous drag principle employing compressed air to install the cable, controlled and assisted by the belt drive system.

Contact us

And we keep in touch

Crosswise Telecom respects your data privacy.

This website uses cookies to ensure you get the best experience on our website. If you continue to use this site, we will assume that you are happy with it. Please read more at our privacy policy page.

I accept