Products:Splice Machines

Fusion splicing is the act of joining two optical fibres end-to-end using heat. The goal is to fuse the two fibres together in such a way that the light passing through is not scattered or reflected by the splice. The first step of fusing is to remove the coating of the end of each fibre, the stripping of the fibre.Then the fibre is cleaved, using a special cleaver, so both ends of the fibres are perfectly flat and perpendicular to the axis of the fibre. After this, the fibres are clamped upon the machine. The two endfaces are controlled and aligned by the inspection microscope and then fused together by the two electrodes. When the fusion is complete, the bare fibre area is protected by a splice protector. The splice machines we offer are from Fujikura, the most widely used brand in the world and known for their performance, productivity and reliability.

FSM-12S Fusion Splicer

Weighing less than two pounds and having a footprint of approximately 6"x5", the 12S provides users with an unprecedented level of flexibility for the most challenging splicing applications. The functional transit case also serves as a workstation when needed. The large 4.5" scratch resistant monitor is viewable in direct sunlight.  Software updates are accomplished via the internet, allowing users to quickly and conveniently update their software as new splice programs become available.  The 12S is also fully compatible with the FuseConnect line of fusion installable connectors.  To cap off all these great features, a long life battery and extended life electrodes keep you up and running when you need it most.


- Fixed groove, Dual-axis observation system

fsm 12 s

- Reliable 0.05dB SM & 0.02dB MM splicing performance
- 15sec splicing in SM-AUTO mode
30sec Tube-heating with Single 60mm sleeve
Long battery life, 100 splice/tube heating cycles
Working table included as a standard accessory
Fibre holder system to accomodate various type of cables
Robust design: drop proof, dust-resistance, rain-resistance
- 5mm short cleave length splicing
- Compact splice capability with 'micro-sleeves'
- Long electrode life provides 3000 splices
- PC software in standard package for easy data management


FSM-22S Fusion Splicer

The 22s is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN and Access Networks. The 22s offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different fibres; SMF, MMF, DSF, NZDSF. Applicable from 125µm cladding diameter/up to 3mm sheath diameter fibres with sheath clamp. 22s provides advanced capabilities; including splice result storage of 200 splices, 5-16mm short cleave length splicing. Quick splicing time is produced in 9 seconds (single mode fibre) and an automated tube-heating time of 30 seconds (single mode 60mm).


The World's Smallest & Lightest Active V-groove Splicer

fsm 22s

Active V-groove fibre alignment
11 second splicing in SM-AUTO mode
30sec Automated Tube-heating with Single 60mm sleeve
200 splice cycles / tube heating cycles per full battery charge
Dimensions measure 120 x 189 x 71mm
Extremely lightweight at 1.1kg including battery
Robust & lightweight design plus shock, dust and rain resistant
4.7 inch color LCD for indoor and outdoor use
Multi-functional carry case and work table accessory
USB communication for PC connection

FSM-70S+ Fusion Splicer

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 6 seconds splicing and 9 seconds tube heating, ruggedized body, improved carrying case, wireless communication functions, etc. They are all for great splicing efficiency.


- Splicing 6sec. (ULTRA FAST)


- Tube heating time 9sec. (Slim60mm)
Minimun manual operation. Splice in 4 steps
High capacity Lithium-Ion battery pack (200 splices/shrinks)
On-board training and support videos
Multi-function transit case with integrated workstation
Slide in AC adaptor
Absolute robustness
Bluetooth capability connection
Automated Wind-Protector


FSM-70R+ Ribbon Fusion Splicer

The Fujikura 70R+ is the world's fastest and most ruggedised ribbon fusion splicer. The 70R+ delivers a splice and heat cycle time of approximately 51 seconds. Incorporating new automated features and on-board instructional videos, it sets the benchmark in speed, ease of use and optical performance


Fully automated wind cover and heater operation

70R plus

- FAST! 11 second splice time /40 second heat time (12F Ribbon)
Long-life battery provides 110 splice/heat cycles
Extended electrode performance with 1500 splices per set
Large, high visibility 4.73” colour screen
30” drop tested on all six sides
Fibre holder and FUSEConnect® compatible
On-board instructional videos
Transit case with work table
Bluetooth capability